INDUSTRIAS TECHNOFLEX MAMUT 20 Manual De Instrucciones página 15

1B
OPERATION
1.4 Operation
The force and the necessary vibration to compact the floor is generated within the vibrant housing,
inside which is mounted by rotating an eccentric which produce the force and frequency of vibration
transmitted to the machine ground to compact and at the same time, you print to this movement
forward movement.
This engine fits on its axis a centrifugal clutch, which allow the exciter to be in a no vibration position
while the engine is in a slow speed level.
ACCELERATOR
FORWARD DIRECTION
STARTER HANDLE
To start the machine, it is necessary to operate in the following way:
1) Close the choke lever.
2) Open the fuel cock.
3) Turn the switch in position ON.
4) Pull the starter handle and after starting return the starter lever to its original position.
5) Accelerate progressively until getting the maximum speed.
ENGLISH 1B-4