Technical Data; Disposal - AEG FW 5645 Instrucciones De Servicio

English
36
Use a mild detergent and follow the instructions of
the manufacturer on amount of detergent.
ATTENTION:
• Please note that the inner lining may not be
chemically cleaned, wrung out, dried in a tum-
ble dryer or ironed.
• Please note that high stress is placed on the
inner lining by frequent washing. The inner
lining should be washed in a washing machine
a maximum of five times during its service life.
We therefore recommend that you wash the
device exclusively by hand.
4. Immediately after washing, pull the inner lining into
its original shape and leave it to dry lying flat over a
washing stand.
ATTENTION:
• Do not use any clothes pegs or similar to at-
tach the inner lining of the foot warmer to the
washing stand. Otherwise this may damage the
inner lining.
5. Let the inner lining dry completely before you put it
back into the foot warmer.
ATTENTION:
• Only reconnect the plug to the foot warmer
when the plug connection and the inner lining
are both completely dry. Otherwise this may
damage the foot warmer.
• Never switch the foot warmer on to dry it. This
may cause an electric shock.
Foot warmers and step switches
1. First remove the plug from the electricity supply and
allow the foot warmer to cool down for at least ten
minutes.
2. Wipe the foot warmer with a damp cloth. For stub-
born stains, you can use mild soap suds.
3. Dry the foot warmer after cleaning.
4. Only clean the step switch with a dry cloth.
Storage
• Remove the plug from the electricity supply.
• Let the device cool down completely before storing
it away.
ATTENTION:
• Store the product in a dry place.
• Avoid bending the device being bent sharply by
items being placed on it during storage.

Technical data

Model: ................................................................... FW 5645
Power supply: ........................................ 220-240 V~, 50 Hz
Power consumption: ................................................. 100 W
Protection class: .................................................................II
Net weight: ...............................................................0.70 kg
Technical and design changes in the course of continu-
ous product development reserved.
Information on compliance
with guidelines
The manufacturer hereby declares that the device
FW 5645 complies with the fundamental requirements
of the European Directive on Electromagnetic
Compatibility (2004/108/EC) and the Low Voltage
Directive (2006/95/EC).

Disposal

Meaning of the 'dustbin' symbol
Save our environment: electronic devices do not belong
in household waste.
Use the collection points provided to dispose of elec-
tronic devices and hand the electronic devices you are
no longer going to use in there.
By doing this, you are helping to avoid the potential
effects on the environmental and human health caused
by incorrect disposal.
In this way, you are making your contribution to recy-
cling and other forms of the reuse of waste electrical
and electronic equipment.
You can find information on where to dispose of the
devices from your municipality or local government.