Syride SYS’Nav Manual De Usuario página 41

The 2 next screens allows you to set
5.
rising and falling threshold of the vario.
The next screen enables to activate the "thermal sniffer" function. The instrument
6.
will produce a specific bip when you fly in an area which do not go up (<0.1m/s) or
down (>0.2m/s). This indicates that you fly either in a zone near a thermal or at the
beginning of the thermal cycle.
You can turn ON or OFF the backlight
7.
of your instrument on the next screen.
Warning : backlight reduces the
instrument's autonomy (-30%).
The next screen enables to turn ON or OFF the alarm when you enter in a controlled
8.
airspace.
The altitude screen enables to select either the altitude given by the GPS (by default) or a
9.
pressure altitude that will be manually settled.
Last screen is to go back to main
10.
screen (#1)
9
9
9 9
9
39