For Your Safety - Dostmann Electronic ScanTemp 450 Manual De Usuario

GB

4. For your safety

• The device should only be used as described within these instructions.
• Unauthorized repairs, modifications or changes to the product are prohibited.
• Never point the device towards anyone's eyes.
• Keep this device and the battery out of the reach of children.
• Batteries must not be thrown into a fire, short-circuited,
taken apart or recharged. Risk of explosion!
• Batteries contain harmful acids. Low batteries should be changed
as soon as possible to prevent damage caused by leaking.
• Never use a combination of old and new batteries together,
or batteries of different types. Wear chemical resistant protective gloves and
safety glasses when handling leaking batteries.
• Remove the battery if you do not use the device for a long period of time.
• Readings may be affected if the device is operated with in radio frequency
electromagnetic field strength of approximately 3 volts per meter, but the
performance of the instrument will not be permanently affected.
• Do not place your device near extreme temperatures, vibrations or shocks.
• The ScanTemp 450 should be stored at room temperature between
–20 to +65°C.
• The lens should be kept clean at all times.
• The sensor lens is the most delicate part of the ScanTemp. The lens should be
kept clean at all times, care should be taken when cleaning the lens using only a
soft cloth or cotton swab with water or medical alcohol, allowing the lens to fully
dry before using the ScanTemp 450.
• Do not leave the device near objects of high temperature.
10
5020-0450_BA_ScanTemp450_01.indd 10
Caution! Risk of injury:
Important information on product safety!
EMC/RFI
P1014500096(TN4
50#反銀龍
Font Color: Bl
Pantone Y
Pantone R
29.06.2018 09:56:28