Dostmann Electronic ScanTemp 450 Manual De Usuario página 14

GB
6. Trouble shooting
14
5020-0450_BA_ScanTemp450_01.indd 14
→ 'Low Battery' icon indicates the battery is low.
→ The battery should be replaced with 2x AAA (LR6), 1.5V
batteries immediately.
→ Please check the model with/without this function.
→ Replace the batteries
→ 'Hi' is displayed when the temperature being measured is
outside of the settings of HAL.
→ Please reset the HAL or select target within specifications.
→ 'Lo' is displayed when the temperature being measured is
outside of the settings of LAL.
→ Please reset the LAL or select target within specifications.
→ For all other error messages it is necessary to reset the
ScanTemp 450.
→ To reset the ScanTemp 450, please wait the instrument
automatic off, remove the battery and wait for a minimum of
one minute, reinsert the battery and turn on.
→ If the error message remains please contact the Service‚
Department for further assistance.
29.06.2018 09:56:29