JVC WR-GX001 Manual De Instrucciones página 10

Carcasa submarina
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
Preparation
"
Pull up the lock lever to unlock
the buckle.
#
Turn the buckle counterclockwise
to open the front lid.
Caution
• Be sure not to damage the front
lid.
$
Check the main casing for
scratches and cracks.
%
Check the O-ring.
• Check the O-ring for foreign
matter, nicks, cracks, etc.
Caution
• Be sure to remove any foreign
matter from the O-ring.
• Never use the O-ring in case of
nicks and cracks.
• Improper handling of the O-ring
may cause water leaks.
&
Leaving the marine case empty, turn the buckle clockwise to close
the front lid.
• Be sure to push down the lock lever to lock the buckle.
• Do not insert the camera in this step.
• Check that there is no foreign matter (dirt, hair, etc.) caught in the front
lid when closing.
'
Submerge the marine case under water.
Submerge the marine case into a bathtub or a container filled with fresh
water and check that there are no water leaks.
Attaching the Marine Case to the Camera
"
Pull up the lock lever to unlock the buckle.
#
Turn the buckle counterclockwise to open the front lid.
10
Open
Lock lever
Front lid
O-ring
Close
Buckle

Publicidad

Tabla de contenido
loading

Tabla de contenido