Tristar SM-6000 Manual De Usuario página 8

Instruction manual
Winding of the bobbins
Figure 1
• Place a yarn pin on the spool pin (no.1).
• Guide the thread through the winding thread guide (no. 2) to the empty
bobbin.
• Place the bobbin winding pin (no.18) on the machine.
• Wind the thread several times clockwise to the empty bobbin and place
it on the bobbin winding pin (no.18).
Figure 2
• Turn the hand wheel (no. 11) clockwise until the thread is tightened.
• Start electric winding by pressing the foot control.
• When the bobbin is full, release the foot pedal, cut the thread, then
remove bobbin
8