Midland Enerjump Mini Jump Manual De Usuario página 14

CHARGE LEVEL INDICATOR
Press the switch button to check the battery level.
When charging, the indicator lights will flash one by one.
The number of steady indicator lights indicates the battery capa-
city:
Indicators
Storage level
All indicator lights will turn off when charging is complete.
CHARGING ENERJUMP MINI
• Plug the supplied cable into any working USB output port.
• Connect the micro USB plug to the "5V 2A" Input port of
ENERJUMP MINI.
STARTING A VEHICLE
• Make sure that ENERJUMP MINI is properly charged (the num-
ber of the indicator lights must be not less than 3).
• Turn off all the accessories on the vehicle.
• Connect the clamps' blue plug into the "JUMPER CABLE"
socket of Enerjump Mini.
• Connect the red battery clamp to the vehicle's positive (+) bat-
tery terminal and connect the black battery clamp to the vehi-
cle's negative (-) battery terminal. Warning: pay attention to the
polarity! A reverse polarity connection (positive to negative)
may cause damage to Enerjump Mini and/or create a spar-
king/explosion hazard.
beep beep
No 1 steady 2 steady 3 steady 4 steady
0% 25%
12
50% 75%
beep beep
100%