Safety Instructions - involight FOG400 Manual De Instrucciones

1.2 Safety instructions

Operating conditions.
WARNING!
This product is designed for indoor use only.
To avoid damage, do not expose the unit to liquids or moisture.
Avoid direct sunlight, strong dirt and strong vibrations. Never operate the fog machine without proper fog
fluid. The device must never be positioned more inclined than 20 ° during operation. To protect the device from
vibration, dust and moisture during transport and storage, use the original packaging or its own special
transport or storage packaging
Electric shock due to improper mains connection.
DANGER!
This product corresponds to the protection class I in its design and may only be operated at a socket with
protective contact. Use only the supplied power cable for connection. Do not modify the power cord or plug,
and check the insulation of the cable regularly for damage. Failure to do so may result in electric shock, fire or
life. In case of uncertainties, contact an authorized electrician.
Electric shock due to high voltages inside the device.
DANGER!
The device contains components that are subject to a high electrical voltage. Do not modify or disassemble the
unit. There are no user-serviceable components inside the device. Failure to do so may result in electric shock,
fire or life.
Disconnection from the mains.
NOTE!
The mains plug is the main disconnect element. Unplug the power cord from the power source. Make sure that
the power outlet is close to the unit and is easily accessible.
Before filling the tank pull the mains plug.
WARNING!
The tank must be filled only when the mains plug is disconnected.
Risk of fire when filling with flammable liquids.
WARNING!
The tank of the unit may only be filled with fog fluids for which a written suitability test is available. Failure to do
so may result in serious injury or property damage resulting from burns. Never use flammable fluids and do not
mix the fog fluid with a combustible liquid.
DANGER!
Risk of burns.
The mist generated by the device is hot immediately after leaving the device and can cause burns.
Occasionally, hot fluid drops may be released from the nozzle. The distance of persons and objects to the fog
nozzle must be at least 50cm. Never touch the fogging nozzle during operation or as long as the appliance has
not cooled completely after use. The nebula is hot during operation and can cause burns.
Protect from moisture and moisture!
WARNING!
Ensure that no mist or other fluids run over the housing or housing parts and enter the interior of the unit. Be
careful not to allow the unit to get wet due to rain, do not use it near water or under humid or wet conditions.
If spilled fluid or other liquids have spilled into the unit or if there is a suspicion of a leak within the unit, this
must not be put into operation. Failure to do so may result in electric shock, fire or life!
12