3M PPS Manual De Instrucciones página 5

14. Clean the gun and adapter with appropriate materials and store appropriately.
15. Unscrew the 3M™ PPS™ Retaining Collar Shroud Assembly (6) by turning the ring counter-clockwise
and remove it from the 3M™ PPS™ Type H/O Pressure Cup (1).
16. Remove the 3M™ PPS™ Lid (5) and liner (4) and dispose of properly referring to the SDS and consulting
local regulations.
17. Clean the 3M™ PPS™ Type H/O Pressure Cup (1) and 3M™ PPS™ Retaining Collar Shroud Assembly
(6) by wiping with solvent and a lint free towel. Store in a clean, dry area.
Caution: Do not soak in solvent.
See your local 3M
Representative for
adapter type
3M™ PPS™ Type H/O
Pressure Cup
7
6a
Item # Description
1
6
5a
5
1a
1b
1c
2
4
3
4
3
5
1
1a
5a
1b
6
1c
6a
7
2
Figure 2
3M™ PPS™ Mini
H/O Pressure Cup
See your local 3M
Representative for
adapter type
Figure 1
Component Listing
3M Part Number
3M™ PPS™ Type H/O PN 16124 - Large
Pressure Cup (Large)
3M™ PPS™ Type H/O Pressure PN 16121 - Mini
Cup (Mini)
Pressure Hose Clip
Pressure Hose Port
Pressure Relief Valve
Pressure Hose PN 16123
3M™ PPS™ Mix Ratio Film PN 16091 - Large
Insert (Optional) PN 16066 –Mini
3M™ PPS™ Liner PN 16024 (25 Lids and
Liners/Kit) – Large
PN 16114 (50 Lids and
Liners/Kit) – Mini
3M™ PPS™ Lid PN 16024 (25 Lids and
Liners/Kit) – Large
PN 16114 (50 Lids and
Liners/Kit) – Mini
Lid Lock Tabs
3M™ PPS™ Retaining Collar PN 16124 –Large
Shroud Assembly PN 16121 –Mini
Shroud Lock Tabs
3M™ PPS™ Plug Included in PN 16024 –Large
PN 16114 –Mini
English - 4