PowerVac PV100
4
Usage
The PowerVac PV100 is a battery powered vacuum cleaner for light cleaning
of wet or dry spills. The appliance is not designed for industrial use. It should
not be used outdoors.
5
Technical description
5.1
Operating description
The PowerVac PV100 can be used as a dry and wet vacuum cleaner.
The battery permits operation if no electrical socket is available.
It takes about 8 to 10 hours to recharge the vacuum cleaner. The integrated
charging electronics automatically completes the charging process.
The vacuuming capacity is approximately 90 W and thus well suited for
even stubborn dirt. The battery can be charged from 230 V AC mains as
well as from your vehicle's on-board 12 V supply.
The vacuum cleaner comes with a dirt canister with a capacity of 3.8 l and a
reusable cloth bag. Both may be easily removed, emptied and cleaned.
5.2
Parts
Nº in fig. 2,
Name
page 2
1
Handle
2
On/off switch
3
Charge gauge
4
Locking key
5
Dirt canister
6
Clip
7
Battery compartment
8
Charge socket
EN
Usage
23