Daewoo DBU-61 Manual De Instrucciones página 13

HOW TO OPERATE BLUETOOTH
1. Put the function switch to BT./CD/USB/CARD/AUX position, select BT mode, then the play will
enter paring status, bluetooth indicator will ash.
2. Turn on the bluetooth on your smart phone or other bluetooth device, search the player
"DAEWOO DBU-61"; if it is required to enter password, the password is "0000", if it is paired
successfully, the indicator will stop ash.
3. Keep pressing the play button can stop the current paing, quickly short press two times of
play buttun to call back, if it is paired with phone.
4. If the player is paired by bluetooth cell phone, when there is a call coming, press one time to
play button to receive the call, press two times to turn o the call.
5. If the player is paired by bluetooth cell phone, after the phone is received, press play button
to hang up the phone call.
6. When bluetooth is being played, press play/pause button to play or pause,
7. When bluetooth is paired, keep pressing stop button to cancel bluetooth paring function.
HOW TO OPERATE THE RADIO
1. Set the function button (21) to the "RADIO" position.
2. Press the band button, you can select band between FM and AM as you desired.
3. Adjust the volume button (3) to a proper level.
4. Switch the tuning button (11) to the program as you desired. During the AM band receiving,
please adjust the unit direction to get perfect receiving result, and during the FM band
receiving please draw out FM antenna (1) and adjust the antenna direction to get perfect
receiving result.
HOW TO OPERATE THE LED LIGHT
1. PUSH the "LED MODE" function button (4). Can make spectrum and color lights cycle display
mode. You can choose 5 di erent lights ash combination or o light option.
HOW TO OPERATE KARAOKE
1. Plug the microphone plug into the MIC 1 (17) or MIC 2 (18).
2. Turn on the microphone switch button, try to sing, turn the MIC VOLUME knob (16) to adjust
the microphone volume to the appropiate level
HOW TO OPERATE CD/MP3
1. Set the function switch (22) to CD/MP3/USB/CARD position.
2. Press the CD open/stop button (6), open the CD door, put the disc (silk-printing side up)
on the principle axis of the mechanism, and close the door. Several seconds later, it will
automatically play the rst song. The LCD will at the same time show the pattern of our disc,
such as "CD" or "MP3".
3. Press the CD play/pause (9), you can pause playback, press again to resume playback.
4. If you want to stop the playback, just to press the CD stop button (6).
5. During the playback, press backward button (7) to skip to the previous song, and press the
CD forward button (8) to skip to the next song. If you press the backward button (7) and
forward button (8) for a long time, you can fast run back/fast run forward.
6. During the playback, press the "MODE" button (5), it will repeat the current song, the LCD will
show as below picture 1; to press the button for second time, it will repeat playback for all
disc, the LCD will show as below picture 2, when you press the button for the third time, the
player can random playback. The LCD will show as below picture 4.
EN
13