General Safety; Intended Use; Inserting The Filter - Dometic DVF Holding Tank Vent Filter Instrucciones De Montaje

Filtro de desaireación
Ocultar thumbs Ver también para DVF Holding Tank Vent Filter:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
DVF
2.1

General safety

!
CAUTION!
• Do not use the vent filter for on-board tanks with waste from on-board
waste water systems that use chlorine or other strong oxidizing
agents.
• Replace the vent filter immediately if the on-board tank overflows
accidentally.
I
NOTE
• Replace the vent filter at the beginning of each boating season for
optimum odour control.
3

Intended use

The vent filter is inserted into the vent hose of waste holding tanks and prevents the
escape of odours when flushing the toilet.
4

Inserting the filter

4.1
Fitting the filter
A
NOTICE!
• Do not insert the vent filter underneath or at the same height as the
tank (fig. 1, page 2).
• Do not insert the vent filter near any heat sources (engine blocks,
lighting etc.) (fig. 1, page 2).
I
NOTE
The vent filter can be fitted at any angle.
➤ Attach the holder (fig. 2 1, page 2) with screws (fig. 2 2, page 2).
➤ Insert the filter, see chapter "Inserting the filter" on page 6.
EN
Intended use
5

Publicidad

Tabla de contenido
loading

Tabla de contenido