Inserting And Changing The Battery; Specifications - Nowsonic DBOX ONE Manual Del Usuario

DBOX ONE
GB
User manual

Inserting and changing the battery

Please follow all instructions for operating the device.
Open the battery compartment next to the OUTPUT socket on the
side panel of the device.
In order to insert the new battery, you must first remove the old
battery from the compartment.
The acid of leaking or damaged batteries may cause heavy skin
irritations. Therefore always wear protective gloves when changing
batteries.
Insert the new battery: Please take care of connecting the battery
terminals correctly.
Close the battery compartment and lock the cover.
If the DBox One is not used for a longer period, please remove the
battery to prevent any damages caused by a leaking battery.
For a long operating time please use Alkaline batteries only.

Specifications

Power supply:
Power consumption:
Battery life:
Frequency response:
Input impedance:
Output impedance:
Maximum output level:
Dynamic range:
Input jack:
Output jack:
THD:
Dimensions:
Weight:
8
www.nowsonic.com
1x 9V battery, type PP3
approx. 65 mA
6 - 8 hours
10Hz – 30kHz
470 kOhm unbalanced
600 ohms balanced
6dBu
>100dB
1/4" TS jack, unbalanced
XLR connector, balanced;
1/4" TS jack, unbalanced (LINK)
0,5%
150 x 130 x 60mm
0,5kg