Troubleshooting - Dometic MWO 24 Instrucciones De Uso

MWO24
8

Troubleshooting

In case of failure of the microwave oven, ERROR appears on the display.
Fault
The microwave oven
does not work.
The following error codes are displayed on the display of the microwave oven:
Error code Fault
F.01 Overcurrent protection
tripped
F.02 Door not closed
HU
Remedy
Make sure that the microwave oven is plugged in correctly. If it is not
properly plugged in, unplug it, wait 10 seconds, and then plug the
microwave oven in correctly.
Check if a fuse is blown or a circuit breaker is tripped. If they are
operating properly, test the socket with another device.
Make sure that the microwave oven and the cooking time are set
correctly.
Check whether the door is properly closed. Otherwise,
the microwaves do not reach the interior of the microwave oven.
Explanation/remedy
➤ Press the
➤ Contact the manufacturer's branch in your
➤ Close the door of the microwave oven.
If the error code is still displayed, then the
temperature protection is enabled. Proceed as
follows:
➤ Press the
➤ Ensure that the product is sufficiently venti-
➤ Wait at least 10 minutes before you put the
➤ If the error code continues to be displayed,
button for more than
3 seconds to turn off the microwave oven.
country (see the back of the instruction
manual for the addresses) or your specialist
dealer.
button for more than
3 seconds to turn off the microwave oven.
lated.
microwave oven back into operation.
contact the manufacturer's branch in your
country (see the back of the instruction
manual for the addresses) or your specialist
dealer.
Troubleshooting
15