Saving And Restoring Settings; Displaying System Parameters - Dometic MWO 24 Instrucciones De Uso

MWO24
6.5

Saving and restoring settings

You can save the set microwave power and the power of the defrosting program
and restore them when needed.
➤ Specify the settings for cooking (chapter "Cooking" on page 10) or defrosting
(chapter "Thaw" on page 12).
➤ Press the
button for at least 2 seconds.
✓ The settings were saved. The display flashes once and a short signal tone sounds.
➤ Press the
button less than 2 seconds to restore the saved settings.
6.6

Displaying system parameters

The system parameters are only shown when the cooking process and defrosting
program have ended without being interrupted.
➤ Press the
button to show the system parameters for the microwave oven.
Number of button presses
Press button once
Press button twice
Press button three times
Press button four times
HU
Operating the microwave oven
Meaning
Displays error code (F.00 = no errors)
Displays battery voltage in volts
Displays temperature of oven electronics
(in °C)
Returns to cooking time
13