Parts Description; Before The First Use - Tristar BL-4009 Manual De Usuario

Ocultar thumbs Ver también para BL-4009:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
Instruction manual
• Unplug the appliance from the socket when changing the spare parts
or for maintenance.
• Do not use this appliance in the bathroom or near a sink filled with
water. If this appliance has fallen into the water do not under no
circumstances directly grab this appliance, but first pull the plug from
the socket.
• Children should be supervised to ensure that they do not play with the
appliance.
• It is absolutely necessary to keep this appliance clean at all times,
because it comes into direct contact with food.
• This appliance is intended to be used in household and similar
applications such as:
- Staff kitchen areas in shops, offices and other working environments.
- By clients in hotels, motels and other residential type environments.
- Bed and breakfast type environments
- Farm houses
• The appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by
children unless they are older than 8 and supervised.
* Competent qualified repair service: after sales department of the producer
or importer or any person who is qualified, approved and competent to
perform this kind of repairs in order to avoid all danger. In any case you
should return the appliance to this repair service.
4

PaRTS DeSCRIPTIoN

1. Motor unit
2. Low speed
3. High speed
4. Lid
5. Chopping blade
6. Bowl

BeFoRe The FIRST uSe

• Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
• Before using your appliance for the first time, wipe off all removable
parts with a damp cloth. Never use abrasive products.
• Place the device on a flat stable surface and ensure a minimum of
10 cm. free space around the device. This device is not suitable for
installation in a cabinet or for outside use.
• Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the local voltage
before connecting the device. Voltage 220V-240V 50Hz)
• The blades of the slicing and chopping disk and the blade chopping
are very sharp, avoid physical contact, you can seriously injure.
2
3
1
4
5
6

Publicidad

Tabla de contenido
loading

Tabla de contenido