Parts Description; Operation And Maintenance; Before Use - Tristar MX-4156 Manual De Usuario

Ocultar thumbs Ver también para MX-4156:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
Instruction manual

PaRTS DeScRIPTIoN

1. Speedselector
2. Normal speed button
3. Base
4. Turbo speed button
5. Release buttons
6. Measuring cup
7. S/S Stick

oPeRaTIoN aND maINTeNaNce

• Remove all packaging of the device.
• Check if the voltage of the appliance corresponds to the main voltage
of your home.
• Rated voltage : AC220-240V 50Hz. Do not use the device near a sink
filled with water. If the device has fallen into the water first pull the
plug from the outlet. Place the device on a flat stable surface and
ensure a minimum of 10 cm. free space around the device. This device
is not suitable for installation in a cabinet or for outside use.
4
All manuals and user guides at all-guides.com
1
2
4
3
5
6
7

BeFoRe uSe

Wash before using for the first time, the S/S stick(No. 7) in warm soapy
water. Rinse and dry thoroughly. The S/S stick(No. 7) is also dishwasher
safe. Attention! Never immerse the base (No. 3) in water or other liquid or
rinse under the tap. Never let the stick blender for longer than 1 minute
continuous run, and then always let the stick blender cool 15 seconds.
uSe
• The hand blender is intended for:
• Blending fluids, e.g. dairy products, sauces, fruit juices, soups, mixed
drinks and shakes.
• Mixing soft ingredients, e.g. pancake batter or mayonnaise.
• Pureeing cooked ingredients, e.g. for making baby food.
• Put the S/S stick (No. 7) on the base (No. 3) until it clicks.
• Immerse the blade guard completely in the ingredients to avoid
splashing.
• Press and hold the normal (No. 2) or turbo (No. 4) speed button to
switch on the appliance When you use the normal speed button, you
can adjust the speed with the speed selector
• (No. 1). The higher the speed, the shorter the processing time required.
To select a different speed setting, turn the speed selector to the
preferred setting before or while you press the normal speed button.
• When you use the turbo speed button, the appliance operates at
maximum speed. In this case, you can't adjust the speed with the
speed selector.
• Blend the ingredients by moving the appliance slowly up and down
and in circles.
• Press the release buttons (No. 5) to disconnect the base of the chopper.

Publicidad

Tabla de contenido
loading

Tabla de contenido