Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
44
Alarm Function
You can set two alarm times; proceed as follows:
• Press the
button (8/13) to switch the device off.
• Use the AL1/AL2 button (4/6) to select one or two
alarm times.
• Press the AL.SET button (15/9). The currently set wake-
up time appears on the display. The hours flash.
• Press the / buttons to set the hours. Press the
AL.SET button to confirm. The minutes flash.
• Set the minutes, press the / buttons. Press the
AL.SET button to confirm.
NOTE:
You can also set the alarm time with the SET fre-
quency control (11 on the device).
• Now use the AL MODE button (3/8) to select how you
want to be woken.
The following options are available:
- "BEEP" (Buzzer):
An alarm sounds when the wake-up time is
reached. The volume increases slowly.
- "FM" (Radio):
As soon as your set wake-up time is reached, the
radio switches on. The last set channel will play. The
volume increases slowly.
- "
" (iPod/iPhone):
CAUTION:
Before plugging in the iPod/iPhone, make sure
that the radio is not in iPod mode.
• If supplied with your iPod, plug the adapter
onto the docking port. You can only ensure that
the iPod fits correctly into the iPod port if the
adapter is plugged in.
• Insert your iPod or iPhone in the dock (1).
CAUTION:
Make sure that your iPod/iPhone is plugged
upright into the port. Do not bend or tilt the
iPod/iPhone whilst it is plugged into the port. This
may cause damage to the dock and/or the iPod/
iPhone.
• Playback from your iPod/iPhone starts in the
set mode at the set alarm time. The volume
increases slowly.
NOTE:
• Follow your iPod/iPhone manual to select
the desired mode.
• If no iPod/iPhone is connected the device
wakes you in BUZZER mode.
NOTE:
• The first or second alarm time is active when the
"
" or "
" symbol is shown in the display.
NOTE:
• The alarm volume is a factory default and cannot be
adjusted.
Turn Off Alarm
Press the
button to turn of the alarm until the next day.
Snooze Function
Press the SNOOZE/NAP button (10/7) to deactivate the
alarm for approx. 9 minutes.
Deactivate Alarm
• To deactivate the alarm times, press the AL1/AL2
button (4/6) repeatedly until the alarm display is no
longer shown.
Sleep Timer (TIMER button (14))
In ON mode, set the time for the device to automatically
switch to standby mode. Select between: 15, 30, 45, 60,
75, 90 and OFF. Repeatedly press this button until the
desired time is displayed. After the set time the device
automatically turns off.
NOTE:
Due to technical reasons, the activated function is not
displayed.
Press the
button (13) to cancel this function. The device
switches to standby mode.
Music Playback from iPod/iPhone
(iPod/iPhone not supplied)
1. If supplied with your iPod, plug the adapter onto the
docking port. You can only ensure that the iPod fits
correctly into the iPod port if the adapter is plugged
in.
2. Insert your iPod or iPhone into the dock (1).
CAUTION:
Make sure that your iPod/iPhone is plugged upright
into the port. Do not bend or tilt the iPod/iPhone
whilst it is plugged into the port.This may cause
damage to the dock or the iPod/iPhone.
3. Press the
button (8/13) to switch the device on.
Repeatedly press the AUDIO button (12/4), until "iPod"
is displayed.
NOTE:
The iPod mode can only be selected when the iPod/
iPhone is plugged in.
4. Depending on the iPod/iPhone Model, firstly release
the button lock and start playing music if necessary
with the
button (2 on RC).
Publicidad
Tabla de contenido
