Insert Weight Pouch Into Bc Retainer; Operation Of Weight System With Handle - SubGear Chaleco Compensador Manual De Usuario

Insert weight pouch into Bc retainer

Improperly securing the pouch in the Bc retainer may result in immediate loss of the
pouch, generating positive buoyancy and initiating an uncontrolled ascent. this may
result in serious injury or death.
1). The weight pouch must be properly in place inside the BC retainer, pushed all the way toward
the back.
2). The buckle clip on the weight pouch must be fully engaged with the clip on the BC. Double
check that it's secure by trying to pull it apart when engaged.
Inserting pouches into the retainers can be done before or after donning the BC.
1). Turn the pouch so the handle is on the top. Figure 10
2). Insert the pouch into the pocket on the BC.
3). Close the hook and loop closure.
4). Insert the handle on the pouch into the holder on the jacket. Figure 11
5). Press the release buckle closed until it is firmly and securely mated.
6). Confirm that the weight pouch is securely held in the BC.

operation of weight system with handle

Do not configure the Bc or equipment in a manner that might obstruct the removal of
the weight pouches.
Ensure that each weight pouch, buckle and handle is unobstructed. Check the ability to release
weight pouches prior to diving.
Failure to generate positive buoyancy in an emergency situation may result in serious injury or
death.
To drop weights during a dive to begin an emergency ascent, do the following:
1). Bring your body into an upright position
2). Grasp the handles of the weight pockets simultaneously and pull strongly until the weight pockets
have been removed from the jacket opening. Figure 12
! WarnInG
Figure 11
! WarnInG
17