König CSBTRCVR100 Manual De Uso página 3

A connection is automatically established if the CSBTRCVR100 is powered.
If you want to switch from one device to another, follow the steps below:
1. End the existing Bluetooth® connection.
2. The CSBTRCVR100 is now ready to be connected to another device.
3. Follow the instructions "Pairing the CSBTRCVR100" to connect the new
device.
LED indication
Indication
Flash every 5 seconds
Constantly switched on Connected
Troubleshooting
If you do not hear any sound coming from your speakers, check the following:
- make sure the CSBTRCVR100 is powered;
- make sure the audio cable is properly connected to the CSBTRCVR100;
- make sure the volume is correctly set;
- make sure the devices are at a maximum distance of 10 metres of the audio
transmitter;
- make sure the Bluetooth® function on your device is activated;
- make sure that there is music playing on your device.
Meaning Description
Pairing Searching the device in pairing
mode/waiting for a connection
CSBTRCVR100 and device are
connected
3
ENGLISH