Alarm Clock - Perel EFL29 Manual Del Usuario

Press SET to enter setting mode. The hour indication flashes on the
2.
display.
Use UP and DOWN to set the hour, then press SET to confirm and
3.
move to the next setting.
Repeat to set minutes, year, month, and day. Note: although the year
4.
does not appear on the display, it is required to display the correct
name of the day (MON, TUE...).
Press MODE to exit the setting mode.
5.

7.4 Alarm Clock

You can use the LED light as an alarm clock. At the set alarm time, the
alarm sounds and you can enter snooze mode. You can set the length of the
snooze interval, or switch off the snooze function completely. Furthermore,
you can choose from various alarm tunes.
Alarm Settings
To set up the alarm, proceed as follows:
Press MODE to enter the alarm mode. The alarm icon
1.
the display.
Press SET to enter setting mode. The hour indication flashes on the
2.
display.
Use UP and DOWN to set the alarm hour, then press SET to confirm
3.
and move to the next setting.
Repeat to set the alarm minutes, the snooze interval (1–60 minutes),
4.
and the alarm tune.
Press MODE to exit the setting mode.
5.
Activating/Deactivation Alarm and Snooze Function
Note: the alarm works even if you fold up the light.
To use the alarm clock, proceed as follows:
Press MODE to enter the alarm mode. The alarm icon
1.
the display.
Press UP repeatedly to select the desired mode. Icons on the display
2.
indicate the selected options. The options are listed below:
Icons Mode
The alarm is active and will sound at the set alarm time. The
snooze function is disabled. When the alarm goes off, press any
control button to stop the alarm.
The alarm and snooze function are active. The alarm will sound at
the set alarm time.
•
To enter snooze mode, press any control button when the
alarm sounds. The snooze icon
alarm will sound again after the set snooze interval.
•
To stop the alarm, press MODE and then press UP repeatedly
V. 02 – 28/04/2015
EFL29
flashes on the display. The
7
appears on
appears on
©Velleman nv