Operation - Kicker KMC5 Manual Del Propietário

OPERATION

Playback
Use the SOURCE button to enter the source menu. Use the knob to choose the input source for the KMC5: Bluetooth, USB, AUX,
AM, FM, WX, and SiriusXM (Requires SiriusXM Connect Tuner and Subscription, sold separately).
The KMC5 will automatically enter Bluetooth pairing mode when there is no Bluetooth connection, with the display message "In Pairing
Mode". To enter pairing mode manually, choose Bluetooth input and then push the MENU button. This will enter the Bluetooth Menu.
Select ENTER PAIRING MODE to begin pairing. When you begin scanning for devices on your audio device, the KMC5 will identify as
"Media Center". Bluetooth Menu options include:
Select Device - view all paired devices and select one
for playback
Delete Device - delete paired device from list
When a radio tuner input is selected, press the seek buttons to search for radio stations with adequate signal strength. To tune stations
manually, press and hold the seek buttons for 2 seconds, then press them once to change frequencies. Use the MENU button while in
WX band to turn Auto-Alerts ON/OFF for Weatherband alert messages. This will interrupt playback for emergency alerts and messages.
Set favorite presets for your favorite AM, FM, SiriusXM, and WX stations by selecting the station, pressing the FAVORITES button,
selecting the favorite number (1–16) you wish to set, and pressing and holding the VOLUME KNOB for 2 seconds.
The USB input source is only available when there is a USB device connected. The KMC5 will automatically switch to USB input when
a USB device is connected and detected. KICKER recommends SANDISK drives for the best performance. Drives must be formatted
in FAT32 fi le system. USB hubs are not compatible. High-bit rate fi les (320kbps) may experience errors. In testing, the KMC5 has been
shown to work with some HDD's and other fi le systems, however, this is not supported by KICKER! USB Menu options include:
Browse - Brows all fi les and folders using the knob to scroll
and select tracks.
10
Disconnect Current Device - disconnects current device and
connects to the next device on the list
Delete All Devices - deletes all stored Bluetooth devices and enters
pairing mode
Repeat - turn Repeat ON/OFF for the current playlist or all tracks