Kicker KMC5 Manual Del Propietário página 12

Receptor multi-media
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Shuffl e - turn Shuffl e ON/OFF for the current playlist or all tracks
The camera and video input may be used to connect an external camera or video source to the KMC5. The reverse trigger wire (+12v)
will automatically activate the camera when the vehicle is placed in reverse. To manually activate/deactivate the video input, press and
hold the FAVORITES button.
Device Settings
Press the MENU button to enter the audio settings for a selected input source. Hold the MENU button for 2 seconds to enter the
device settings menu. The available device settings are: Loud, Area, Beep, Zone2, Z2VOL, HPF, and Dimmer. Use the VOLUME
KNOB to change the available values for each setting.
Loudness - select On or Off for a low frequency boost
BEEP - select whether the KMC5 responds with beeps
Zone 2 Control - Allows you to select which connection is controlled by the Zone 2 volume:
Internal Power: Zone 2 channels are controlled by Zone 2 volume. Zone 2 RCA is controlled by Zone 1 volume.
Preamp: Zone 2 RCA is controlled by the Zone 2 volume. Zone 2 internal channels are controlled by Zone 1 volume.
Both: Zone 2 channels and Zone 2 RCA are controlled by Zone 2 volume.
Z2VOL - change behavior of Zone 2 volume control:
Relative: Zone 2 volume is locked to main volume.
Naming - Change the Zone 2 name: Zone 2, Tower, Transom, Cockpit, Interior
HPF - hi-pass crossover: OFF, 50Hz, 80Hz, 120Hz
Day/Night - change color scheme from Day Mode to
Night Mode. KMC5 will switch automatically when lights
are turned on (orange illumination wire must be connected).
DME - digital music enhancer will enhance the sound quality of
compressed audio fi les.
Tuner - select USA or Europe
Zone 2 - toggles Zone 2 volume control on/off
Absolute: Zone 2 volume is adjusted independently of main volume
Dimmer - adjusts screen and button brightness: 0–12
Low Battery Alert - turn the Low Battery Alert ON/OFF. When set to
ON, the KMC5 will activate a visual and audio alert when the voltage
drops below +10.5V, indicating the battery needs to be charged.
11

Publicidad

Tabla de contenido
loading

Tabla de contenido