iSi Easy Whip PLUS Manual De Instrucciones página 11

It is difficult to screw on the charger holder.
1. The charger being used is not suitable
Only use original iSi cream chargers.
The cream charger will not puncture.
1. The charger being used is not suitable:
Only use original iSi cream chargers.
2. The charger was inserted backwards:
Insert the charger correctly (see
diagram: Instructions for Use).
3. The puncturing unit has been damaged:
Send the whipper to iSi or to a service
center.
During operation, gas is leaking between
the bottle and the head.
1. The head gasket is missing:
„Release the pressure" and insert
the head gasket into the head.
2. The head gasket has been damaged:
„Release the pressure." The head gasket
needs to be replaced and is available as
an original iSi spare part.
3. The head was not tightened securely:
„Release the pressure"
Tighten the head on to the bottle
by hand as per the instructions.
4. The bottle has been damaged on the upper
edge:
„Release the pressure" and send the
whipper to iSi or a service center.
Service.
Replacement parts are available individually
and at an affordable price.
See your specialist dealer for the availability
of replacement parts. In Austria, you can also
get in contact via info@isi.com. In the US
contact isinorthamerica@isi.com
Only send in the complete whipper for repairs.
Replacement parts can be seen in greater detail
on the expanded drawing.
12 13
EN