Rear Panel - Phonic i7100 Manual Del Usuario

14. LCD Display
The LCD screen will display the number of the preset last used.
This clearly legible, numberic digit display has plus/minus indicators
to show that parameters are being incremented or decremented in
edit mode. The "Hz,""kHz,""1/60," and "dB" indicators to the right
of the display are illuminated when the corresponding parameters
are being displayed or edited. For example, if you raise the level
of a filter, the dB indicator lights up. A plus or minus symbol to the
left of the preset number signal whether numbers are negative or
positive values if applicable.
15. Store key
Any modifications mode to preset can be stored by using the store
key. There are twenty user-defined slots available.
16. Bypass Key
The bypass key allows for optional bypassing of the parametric
filters or all filters.
17. Power Switch
Use to switch the Feedback Silencer on or off.
i7100

Rear Panel

18. AC Power Cable Connector
Connect the supplied AC power cord to this connector and insert
the plug into a wall-socket of a suitable voltage.
19. Audio IN Connectors
The audio in connectors contain combo jacks that accept either
XLR male connectors or balanced 1/4" TRS jacks for analog
input.
20. Audio OUT Connector
These are XLR male connectors and balanced 1/4" TRS jacks
for analog output.
21. Operating Level Switch
The operating level switch is used to adapt the Feedback Silencer
to different operating levels. You can select a -10dBu semi-pro
level, used for home recording, or a +4dBu level, as used in
professional studios.
7