Base Installation; Door Handle Installation - Westinghouse QL292 Manual Del Usuario

Installation (continued)

BASE INSTALLATION

1 . Unpack the unit and place the sink on a blanket or cardboard
to protect the surface .
2 . Turn the cabinet (A) upside down onto the protective surface .
3 . Gently attach the cabinet base (G) onto its proper location .
Using the supplied base screws (J), attach the base to the
cabinet .
4 . Attach cabinet feet (K) to the base . Retract each foot all the
way down .
5 . Gently place the cabinet upright .

DOOR HANDLE INSTALLATION

1 . Insert the door handle screws (H) into the pre-drilled holes in
each door .
2 . Attach the door handles (F) and hand tighten the door handle
screws (H) using a screwdriver .
QL292
CAUTION:
Do not place side load onto feet when rotating
the cabinet .
A
F
8
J
G
K
H