Publicidad
8. Unscrew the charger holder and recycle the
NOTE: A slight hiss may be heard when
removing the charger holder. This is normal.
9. Screw the cap onto the threads.
Operation
10. Gently press the lever to remove the soda
NOTE: If necessary, shake the Soda Siphon again
to achieve optimum use.
Cleaning.
NOTE: Please observe the illustrations on
cleaning!
1. Press the lever until the siphon is completely
2. Remove the riser tube and measuring
3. Rinse the product components with clear,
NOTE: Never use scouring agents, abrasive
sponges/brushes, or sharp objects to clean the
siphon.
NOTE: Do not put in the dishwasher and do not
wash in boiling water!
47080601_SMC_GA_kurz.indb 10
WARNING: The siphon is now pressurized!
The head must never be unscrewed while
the siphon is pressurized.
7. Shake the siphon vigorously at least 5 times.
empty iSi soda charger.
water. Direct the stream toward the internal
wall of the drinking glass.
empty and there is no pressure left. Unscrew
the head from the siphon.
tube as shown in the illustration.
potable water (max. 50°C/122°F) only.
10
08.11.18 15:00
Publicidad
