Important; General Advice; Device Description; Initial Use - Beurer babycare BY 76 Manual De Instrucciones

IMPORTANT: To avoid damage to the device, please observe the following:
• Fill the device with water before switching it on.
• Do not operate the device outside.
• The device must only be used on an AC network and with the voltage specified on the type plate.
• Unwind the mains cable fully in order to avoid overheating.
• Keep the mains cable away from hot surfaces.
• Do not remove the mains plug from the socket by pulling on the cable!
• Do not pull, twist or bend the mains cable.
• Never submerge the device in water. Never rinse it in running water.
• Do not use any additional parts that are not recommended by the manufacturer or offered as
accessories.

General advice

• Repairs must only be carried out by Customer Services or authorised suppliers. Do not open or
repair the device yourself under any circumstances, otherwise its perfect functioning is no longer
guaranteed. Failure to observe this will invalidate the warranty.
• If you should have any questions about using our devices, please contact either your retailer or
Customer Services.

5. Device description

Overview
1. Pole
2. Lid with steam opening
3. Bottle grille
4. Basket for small parts
5. Fixing aid
6. Gripping tongs
7. Sterilisation container with
heating element
8. Digital display
9. switch
10. Mains cable
11. Cable compartment
12. Measuring jug

6. Initial use

1. Before use, ensure that the device and accessories (including mains cable) do not have any visible
damage.
2. Place the device on a firm, level surface.
3. Put all the included parts of the steriliser together:
10
1
3
4
5
6
2
11
12
7
8
9
10