Beper BP-2116 Manual De Instrucciones página 25

Wrist blood pressure monitor Use Instructions
Quick Start
1. Install batteries. (See Figure A )
2. Remove clothing from the wrist area (See Figure B).
3. Rest for several minutes prior to testing. Wrap cuff around left wrist (See Figure C)
4. Sit in a comfortable position and place wrist level with heart. (See Figure D)
5. Press " " button to start testing. (See Figure E)
Battery Installation
Slide battery cover off as indicated by arrow.
Install 2 new AAA alkaline batteries according to polarity.
Close battery cover.
Note:
1) Replace batteries when Low Battery Indicator " " appears on screen.
2) Batteries should be removed from device when not in operation for an extended
period of time
Unit Operation
1. Time /Date Setting
With power off ,Press " " button 3seconds to set the Time/Date mode. Set the month first
by adjusting the "M " button. Press " " button again to confirm current month.
Continue setting the day, hour, and minute in the same fashion.
Every time the " " button is pressed, it will lock in your selection and continue in suc-
cession (month, day, hour, minute.)
2. Save Settings
While in any setting mode, press " " button about 3seconds to turn the unit off. All
information will be saved
Note: Unit will automatically save all information and shut off if left it for 3 minutes.
25