Beper BP-2116 Manual De Instrucciones página 26

Wrist blood pressure monitor Use Instructions
Applying The Wrist Monitor
Do not apply over clothing. If wearing a long sleeved shirt, be sure to roll sleeve back
to forearm.
Apply monitor to wrist as illustrated. Tighten cuff firmly as not to wiggle.
Do not stand while testing. Sit in a comfortable position and place wrist level with heart.
Testing
1. Power On
Press and hold " " button until a beep sounds. The LCD screen will appear for one
second as unit performs a quick diagnosis. A long tone indicates device is ready for testing.
Note: Unit will not function if residual air from previous testing is present in cuff. The LCD
will flash " " until pressure is stabilized.
2. Pressurization
Initial pressure is first pumped to 190 mmHg. If the current user's systolic blood pressure
is over 190mmHg, the unit will automatically re-inflate to the proper shelf.
Note: Pressurization will gradually subside and ultimately stop when cuff is not properly
applied to the wrist.
If this occurs, pressing the " " button to turn the unit off.
3. Testing
After cuff inflation, air will slowly subside as indicated by the corresponding cuff pressure
value. A flashing will appear simultaneously on screen signaling heart beat detection.
Note: Remain relaxed during testing. Avoid speaking or moving body parts
4. Result display
Three short beeps sound when testing is complete. The screen will display measurements
for systolic and diastolic blood pressure. A indicator representing the current measurement
will appear next to the corresponding WHO Classification.
26