NEC NP01SW Serie Manual De Instalación página 7

• Do not use in locations subject to humidity or water as the below. At the same time,
do not put on a liquid filled container on the top of the product. Failure to do so could
result in electric shocks.
- Do not use in rain or in snow, on beaches or shores.
- Do not use in bathrooms or shower stalls.
- Do not place vases or flowerpots on top of the product.
- Do not place glasses, cosmetics or chemicals on top of the product.
Should foreign objects, water, etc., get inside the product, unplug the power cord im-
mediately. For the receiver box, disconnect all connected cables. After unplugging the
power cord, contact your dealer.
• Do not use in the below conditions. Failure to do so could result in electric shocks.
- On rickety tables, tilted surfaces or other unstable places.
- Near heaters or in places with strong vibrations.
- Outdoors or in humid or dusty places.
- In places exposed to soot or steam.
- Near stove tops or humidifiers.
• If you hear the roll of thunder, do not touch the power plug. Doing so could result in
electric shocks.
• Connect this product's HDBaseT port and LAN port to a network on which there is
no risk of overvoltage. Overvoltage applied to the HDBaseT port or LAN port could
result in electric shocks.
• This product's LAN port does not support PoE. Connecting this product's LAN port
to a network supplying electric power could result in combustion or damage.
• Use in a well-ventilated place. Do not obstruct the receiver box's ventilation holes.
Doing so could cause the receiver box to overheat, leading to fire. Provide sufficient
space around the product.
Other Cautions
• Can not use for HDBaseT receiver box other than the included one. This product is available
exclusively for the included receiver box.
• Use the included HDMI cable and RS-232C cable for connecting the receiver box and display
device.
• This product only supports one-on-one connection using the HDBaseT port of the projector,
display or receiver box. This product's HDBaseT port does not support connection with mul-
tiple devices using a hub, etc.
• Do not route the commercially available LAN cable used for connection between this product
and a projector, display or the receiver box's HDBaseT port outdoors.
• Do not install and store this product in the below circumstances. Failure to do so may cause
of malfunction.
- In powerful magnetic fields
- In corrosive gas environment
• When moving this product, first disconnect all connected cables. Failure to do so could result
in damage.
• Make sure to power off this product before connecting/disconnecting the LAN cable on the
this product's HDBaseT port.
Failure to do so could result in damage.
• When disposing of the product
When disposing of this product, first consult your store of purchase or local government.
CAUTION
ENG-5