Whisk
Insert the whisk 2 into the whisk holder 2 until it snaps in.
1.
The put the assembled whisk on the motor block 2 so that the arrow (reverse
2.
side) points towards the symbol
3.
Turn the whisk until the arrow points towards the symbol
in.
Chopper
The very sharp blade can cause injuries. Handle the knife with care.
Put the knife 2 on the holder within the bowl 2 .
1.
2.
Fill in the desired foodstuffs.
Put the cap 2 on the bowls 2 .
3.
Put the motor block 2 on the cap 2 so that the arrow (reverse side) points
4.
towards the symbol
Turn the motor block 2 until the arrow points towards the symbol
5.
Operation
Never exceed the maximum operating period of 1 minute. After 2 subsequent pro-
cesses, let the appliance cool down for 2 minutes.
Foodstuffs must not be processed when they are too hot. Spurting contents may
lead to burns.
When you have assembled the hand-held blender set as desired, proceed as fol-
lows:
1.
Insert the plug into the socket.
2.
Hold the immersion blender / whisk into the desired foodstuff.
3.
Set the speed to 1
Press the start button 2 and keep holding it down.
4.
5.
During preparation you can increase the speed by turning the speed controller
.
Or press the turbo button 2 for a high speed.
6.
26
.
.
.
. The whisk snaps
.