Makita DBO180 Manual De Instrucciones página 6

Lijadora inalámbrica de órbita excéntrica
Ocultar thumbs Ver también para DBO180:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Indicator lamps
Lighted
Off
015658
NOTE:
Depending on the conditions of use and the
ambient temperature, the indication may differ
slightly from the actual capacity.
Switch action and speed adjusting button
1
2
012878
To start the tool, press the start/speed adjusting button.
The tool starts with high speed mode. Each time you
press the start/speed adjusting button, the speed mode
changes in an order of hi speed, middle speed, and low
speed.
To stop the tool, press the stop button.
Refer to the table for the relationship between the speed
mode and the kind of work.
Speed mode
Number of rotations
High
Middle
Low
012897
NOTE:
The table shows standard applications. They may
differ under certain conditions.
Remaining
capacity
Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
The battery
may have
malfunctioned.
1. Stop button
2. Start/speed
adjusting button
Usage
Regular
11,000
sanding
Finish
9,500
sanding
7,000
Polishing
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and the
battery cartridge is removed before carrying out
any work on the tool.
Installing abrasive disc
1
012875
To install the abrasive disc, first remove all dirt or foreign
matter from the pad. Then attach the abrasive disc to the
pad. Be careful to align the holes in the abrasive disc with
those in the pad.
Installing dust bag (optional accessory)
1
012876
Install the dust bag on the tool with its mouth directing
downwards.
Emptying dust bag
1
003323
When the dust bag is about half full, switch off the tool,
and remove the dust bag from the tool. Then remove the
dust nozzle from the dust bag after unlocking the dust
nozzle by turning it slightly counterclockwise. Empty the
dust bag by tapping it lightly.
6
1. Pad
2. Abrasive disc
2
1. Dust bag
1. Dust nozzle

Publicidad

Tabla de contenido
loading

Tabla de contenido