Bimar PSK1A Manual De Instrucciones página 6

Fax +32 030 9904733

Models:
Vacuum brush
semi long haired
(blue)
ASSEMBLY
• Connect the brush to the extension hose supplied
(3), using the nozzle (2).
• Connect the hose of the brush using the adapter
universal (1) to the inlet hose of the vacuum
cleaner. Depending on the diameter of the nozzle
of your vacuum cleaner, cut the hose adapter with a
hacksaw (not supplied), as shown in the image to
the side.
USE
Before each use, check that the kit (hose, brush) are in good condition.
• Before holding the brush up to your pet's coat, check the optimum suction with your hand, and adapt
it the thickness and texture of the coat. Brush your pet with soft strokes.
• Warning: never hold the brush still on your pet's fur for too long. Always keep the brush moving.
The stomach and legs should be brushed gently. Reduce the suction of the vacuum where necessary.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar
(Italy). The pages must be reproduced and folded in
order to obtain a booklet A5 (+/- 148.5 mm width x 210
mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't
change the page numbering. Keep the language
integrity.
Vacuum brush Vacuum brush
shaggy short soft short haired
haired (black) (black)
Assembly page 6/16
Vacuum brush
long haired
(blue/black)
6/16
Vacuum brush long
haired with thick
undercoat
(blue/clear)