INDICATION OF BATTERY STATUS
The appliance will display the battery status (charging/discharging) by its LED charging lights as follows:
When the BabyBalanZ is being used:
Green light: The battery is fully charged.
Flashing green light: The battery has
started to discharge but there is still
time to use the product.
Yellow light: The product's battery is
low. You must put the charger plug into
the wall socket.
Other indications of the lights:
Flashing yellow and green light: When the BabyBalanZ becomes locked and stops working, the light will
flash in yellow and green. To resume operation, you must turn off the 2 switches (safety and operating)
and switch them on again.
*If it is working plugged into the mains, you must unplug the BabyBalanZ to be able to resume operation.
*To find out the battery charge level, the safety switch on the base of the device must be ON.
When the BabyBalanZ is charging:
When the charger plug is plugged
in, the red light will come on and will
remain on during the entire charging
process.
The battery level light will change
colour depending on the battery
charge (yellow, flashing green, green).
Once fully charged, the green light
comes on. You can now unplug the
charger plug.
15
EN