Feeding Alert; Zoom In/Out; View Video Through Tv; Night Light/Night Vision - Rimax RB205 Manual De Instrucciones

Feeding Alert

Press the [ ] button located at the left of the monitor unit system. Select the
desired time you wish the unit to buzz. The following options are available: from 30
minutes to 4 hours with intervals of 30 min. Press OFF to deactivate the Feeding alert.
The monitor will automatically buzz once the time has elapsed.
Press any button on the monitor unit system to stop the alarm. If no button is
pressed, the feeding alert will repeat for 3 times with an interval of 3 minutes.

Zoom In/Out

Press and hold the [
the icon [ ] will appear on the status bar. Push [
position for monitoring, Press and hold three second the [
position and the icon [
snap photo or video recording.
Press and hold the [

View Video through TV

Connect a standard AV cable into the AV out socket on the side of the parent unit and
into the AV input of the TV.
AV cable is an optional accessory (Not included).

Night Light/Night Vision

Press and hold [
or Off the night light function.
The night vision function can sense the surrounding environment of the camera unit
and automatically start the monitoring. The monitoring is available even under full
darkness.
] button located at the left of the monitor unit to magnify
] will appear on the status
] button again to exit Zoom in.
] button on the camera unit for approximately 3 seconds to On
] to set the appropriate
In this circumstance, you can
.
30
] button to lock the