Bosch 1250DEVS Instrucciones De Funcionamiento Y Seguridad página 4

Ocultar thumbs Ver también para 1250DEVS:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BM 2609932224 07-09:BM 2609932224 07-09 7/30/09 8:22 AM Page 4
Unplug the sander before changing
accessories. Accidental start-ups may occur
if sander is plugged in while changing an
accessory.
If your tool is equipped with a dust bag,
dust canister, or a vacuum hose dust
port, empty the dust container frequently
and after completion of sanding. Be
extremely careful of dust disposal, materials
in fine particle form may be explosive. Do
not throw sanding dust on an open fire.
Spontaneous combustion, may in time, result
from mixture of oil or water with dust
particles.
Always wear eye protection and a dust
mask for dusty applications and when
sanding overhead. Sanding particles can be
absorbed by your eyes and inhaled easily
and may cause health complications.
Use special precautions when sanding
chemically pressure treated lumber, paint
that may be lead based, or any other
materials that may contain carcinogens. A
suitable breathing respirator and protective
clothing must be worn by all persons entering
the work area. Work area should be sealed by
Safety Rules for Orbital Sanders
-4-
plastic sheeting and persons not protected
should be kept out until work area is thoroughly
cleaned.
Do not wet sand with this sander. Liquids
entering the motor housing is an electrical
shock hazard.
Do not use PSA pad on random orbit
sanders
whose
12,000/min. Exceeding the maximum
operating speed of pad may cause pad to
rupture or fly apart during use striking user or
bystanders.
Do not use sandpaper intended for larger
sanding pads. Larger sandpaper will extend
beyond the sanding pad causing snagging,
tearing of the paper or kick-back. Extra paper
extending beyond the sanding pad can also
cause serious lacerations.
Clamp or secure workpiece when
sanding. Clamping the workpiece prevents
it from being ejected from under the sander
and leaves both hands to control the tool.
Keep the cord away from the spinning
pad and sandpaper. The cord can become
entangled with the pad.
speed
exceeds

Publicidad

Tabla de contenido
loading

Tabla de contenido