Stomer Professional SAD-18-I Instrucciones De Servicio página 7

Cordless impact wrench
TECHNICAL DATA
2
OPERATION
GENERAL POWER TOOL SAFETY
WARNINGS
Read all safety warnings and all instructions. Fail-
ure to follow the warnings and instructions may
result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future ref-
erence. The term "power tool" in the warnings
refers to your mainsoperated (corded) power
tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
● Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
● Do not operate power tools in explosive atmo-
spheres, such as in the presence of fl amma-
ble liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
● Keep children and bystanders away while op-
erating a power tool. Distractions can cause
you to lose control.
ELECTRICAL SAFETY
● Power tool plugs must match the outlet. Nev-
er modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodifi ed plugs and matching outlets
will reduce risk of electric shock.
● Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
● Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
● Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
and moving parts. Damaged or entangled
cords increase the risk of electric shock.
● When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduc-
es the risk of electric shock.
● If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD re-
duces the risk of electric shock.
1
PERSONAL SAFETY
● Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or un-
der the infl uence of drugs, alcohol or medication.
A moment of inattention while operating power
tools may result in serious personal injury.
● Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes,
hard hat, or hearing protection used for appro-
priate conditions will reduce personal injuries.
● Prevent unintentional starting. Ensure the
switch is in the off-position before connecting to
power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your
fi nger on the switch or energising power tools
that have the switch on invites accidents.
● Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power
tool may result in personal injury.
● Do not overreach. Keep proper footing and
balance at all times. This enables better con-
trol of the power tool in unexpected situations.
● Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.
● If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-related hazards.
POWER TOOL USE AND CARE
● Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at
the rate for which it was designed.
● Do not use the power tool if the switch does
not turn it on and off. Any power tool that can-
not be controlled with the switch is dangerous
and must be repaired.
● Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing ac-
cessories, or storing power tools. Such pre-
ventive safety measures reduce the risk of
starting the power tool accidentally.
● Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in
the hands of untrained users.
● Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the pow-
er tool's operation. If damaged, have the power
7