Reset The Device - iCES IBTS-6 Manual Del Usuario

5. You also can use the controls on the Speaker itself:
- Press and hold the "
- Press and hold the "
6. When the maximum or minimum volume is reached, a beep sound will be heard.
7. Disconnect the Audio cable when it is done.
3.10 RGB Decoration Lights Effect On and Off
1. This device's design allows you to switch the RGB decoration lights effect On and Off in order
to save the battery energy if you want it to. This option can extend the playing time for music.
2. Press the " / " (3) button shortly to switch Off the RGB light.
3. Press this button shortly again to switch on the RGB light.
4. Furthermore, the RGB decoration lights will turn On again automatically each time you switch
between the Bluetooth paired mode and the AUX in mode.
3.11 Low Power Reminder and Power Off
1. In case the power of the Speaker is low, it will send tones every minute as a reminder. When
you hear this sound, please connect the device with the USB power for charge if you still want
to use the device.
2. If you don't do this, the Bluetooth Speaker will power Off automatically within minutes.
3. In this case, the device cannot be turned On, until you recharge the battery at least 10 ~ 15
minutes, because the rechargeable battery doesn't have enough energy.
4. Press and hold the "
energy if you want.

3.12 Reset the Device

In some circumstances the device's functions may not function well and need to be reset. To reset
the Bluetooth speaker:
Press the " / " (4) and the "
turns OFF. Then press and hold the "
reset is done.
/ (6)" button to increase the volume level.
/ (4)" button to decrease the volume level.
/ " (3) button to turn the device On after it's charged with enough
/ " (6) button at the same time; the device is reset and
/ " (3) button to turn On and restart the device after the
8