2-2 Control Elements, Transmitter
1. 1/3"CMOS color image sensor
2. Rainproof solid aluminum housing
3. Microphone
4. Power/Channel indicator LED (light-emitting diode)
Power on or change the channel, LED blinks according to the
channel number you want
5. 2.4GHz Antenna
6. 9VDC power connector
7. Camera Mounting Bracket
8. Channel selection SW(switch) (See Fig3)
● Select the channel by sliding the slide switch to the channel number
you want
● Note: Open the rubber cover to slide channel selection SW, then
replace and tighten the cover
16