Technical Information - MSW THERMO 2000 Manual De Instrucciones

SYMBOLS
The operation manual must be reviewed.
Electrical equipment must not be disposed with general trash.
This machine complies to the CE declarations.
Caution! Hot surface may cause burns.
2nd protection class machine with double insulation.
Do not use the device while it rains or in high humidity environments.
Unplug the device if the power cable is damaged.
Warning! Risk of electric shock.
Safety glasses must be used.
Safety shoes must be worn.
Caution! Wear protective gloves.
Drawings in this manual are for illustration purposes only and in some details,
PLEASE NOTE!
they may differ from the actual ones in machine.
The original operation manual is in German. Other language versions are translations from German.
USER MANUAL
SAFETY INSTRUCTIONS
General safety information for the use of electrical devices:
To avoid injury caused by fire or electric shock, please consider following the safety instructions while using
this device. Please read the instructions carefully and make sure to understand them well. Keep the manual
near the equipment for reading it at any time. Always use current sources that are connected to the ground
and that provide the necessary voltage (this information is located on the device's label). If you have any
doubts, let an electrician check that your outlet is properly grounded. Never use a damaged power cable.
Do not open the unit in damp or wet environment or if your hands or body are damped or wet. Protect
the equipment from solar radiation. Use the device in a protected location to avoid damaging the equipment
or endangering others. Make sure the device cools down and avoid placing it close to other devices that
produce heat. Before cleaning the device, disconnect it from the power source. Use a soft damp cloth for
cleaning. Avoid using detergents and make sure that no liquid enters the equipment. No internal element
of this device needs maintenance from the user. Opening the device without approval leads to a loss of
warranty!
SAFETY GUIDELINES
1. Please read and understand the instructions carefully before operating the device! Please observe
carefully the safety guidelines to prevent damages due to improper use!
2. Please keep this manual available for future reference. In case the device is passed to a third party, the
manual must be passed.
3. The device should only be used in accordance with its designated use.
4. We do not offer any warranty for damages resulting from improper use or incorrect operation.
5. Before the first use, check whether the main voltage and current comply with the indicated information
on the type plate.
6. This device is not intended to be operated by people (including children) with limited physical, sensory
or mental capacities, as well as with lack of experience and/or knowledge, unless they are supervised
by a responsible person for their safety or if they have received instructions of how to operate the
equipment.
8
7. ELECTRIC SHOCK HAZARD! Do not attempt to repair the equipment by yourself. In case of device's
failures, reparations must be done by experts.
8. Please check regularly the main plug and the power cable. If the power cable is damaged, it must be
replaced by the manufacturer or customer service or another qualified person in order to prevent
hazards.
9. Avoid squeezing, bending or rubbing the power cable on sharp edges the power cable in order to
prevent damages. And also keep the power cable away from hot surfaces and open flames.
10. CAUTION! DANGER TO LIFE! While cleaning the equipment, never immerse the device in water or
liquids.
11. Under no circumstances should the housing be opened.
12. Only use extension leads with a minimum nominal cross sectional area of 1.5mm.
13. When operating, the device make sure your hands are dry and never use the device during rainfall,
hail, etc.
14. Do not direct the hot air stream at people or animals.
15. Do not touch the nozzle – risk of burning!
16. Do not use the device in potentially explosive areas.

TECHNICAL INFORMATION

Product name
Model
Catalogue no
Rated voltage [V] / Frequency [Hz]
Rated power [W]
Weight [kg]
Temperature [°C]
AREAS OF APPLICATION
The thermal weeder is designed for thermal control of weed on lawns / flowerbeds as well as inflammable
surfaces such as curbs, pavements, paths, concrete drives, brick walls, etc.
Do not use the thermal weeder:
• for heating rooms
• for melting snow or ice
• inside buildings
• at places where petrol or other flammable materials are stored
The user is responsible for any damage resulting from non-intended use of the device.
BERORE THE FIRST USE
Upon receipt of the goods, check the package integrity before opening it. If the packaging is damaged, please
contact your carrier company and distributor within 3 days, and document the damages as detailed as
possible. Do not turn the package upside-down! In case of transporting the package, please kept it always
horizontal and stable.
DISPOSING OF PACKAGING
Please keep all packaging materials (cardboard, plastic tapes and Styrofoam), so in case of a problem, the
device can be sent back to the service centre in accurate condition!
Rev. 04.05.2017 Rev. 04.05.2017
Thermal Weeder
MSW-THERMO 2000
6232
230~ / 50
2000
1,7
Max. 650
9