Aqua Medic multi reactor S Manual De Instrucciones página 7

In order to prevent cloudiness caused by some filter materials, such as activated carbon or phosphate remover,
simply rinse them with water prior to use with the multi reactors. The pump needs to be cleaned as required.
To do this, open the pump and clean the individual components.
Note: Low water level in the filter sump may lead to dry running and thereby overheating of the pump. If the
pump is sucking in air, it could result in salt or calcium deposits inside the impeller housing which results in
pump failure.
3. Warranty conditions
AB Aqua Medic GmbH grants the first-time user a 24-month guarantee from the date of purchase on all material
and manufacturing defects of the device. Incidentally, the consumer has legal rights; these are not limited by
this warranty. This warranty does not cover user serviceable parts, due to normal wear & tear ie: impellers or
drive wheels etc. The original invoice or receipt is required as proof of purchase. During the warranty period,
we will repair the product for free by installing new or renewed parts. This warranty only covers material and
processing faults that occur when used as intended. It does not apply to damage caused by transport, improper
handling, incorrect installation, negligence, interference or repairs made by unauthorized persons. In case of
a fault with the unit during or after the warranty period, please contact your dealer. All further steps
are clarified between the dealer and AB Aqua Medic. All complaints and returns that are not sent to
us via specialist dealers cannot be processed. AB Aqua Medic is not liable for consequential damages
resulting from the use of any of our products.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved – 05/2019
7