Assembling The Rollers - AEG RA 5520 Manual De Instrucciones

• Under no circumstances may the radiator be used in rooms with
explosive gas (e.g. petrol) or while work is being carried out with
inflammable adhesives or solvents (e.g. when gluing or painting
parquet, PVC etc.).
• Do not insert any objects into the radiator.
• Ensure that a safety distance is maintained between the power
cord and the housing.
• Do not use the radiator in the open air.
• Do not use the radiator in the immediate surroundings of a bath-
tub, a shower or a swimming pool.
• The radiator should not be placed immediately below a socket-
outlet.
• The radiator should only be used in an upright position.
• If the radiator should fall over, first remove the plug from the
socket and allow the radiator to cool down before returning it to
an upright position.
• Do not repair the appliance by yourself. Always contact an au-
thorized technician. If the supply cord is damaged, it must be re-
placed by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.

Assembling the Rollers

CAUTION:
Before the appliance is used
for the first time the rollers have
to be attached.
Please also see our illustration!
1. Turn the radiator upside down.
NOTE:
It is best to place a blanket underneath so that the
housing is not damaged.
RA 5520_RA 5521_RA 5522_IM
2. Place the U-shaped brackets between the first and second
and between the last and penultimate fin (Pos. 1).
3. Insert the ends of the brackets through the holes in the
roller carriers (Pos. 2).
4. Attach the brackets with the wing nuts.
Notes for Use
Unpacking
• Remove any protective foils and transport packaging from
the appliance that may be present.
• Unwind the cable completely.
English
37
15.06.18