Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
RM 1510 / RM 2010
MOUNTING LEGS
1. Place the wheels on the brackets and click them together.
2. Place the brackets with wheels on the ends of the bottom of the unit and screw.
MANUAL
• Connect the device to the network.
• Turn the thermostat control knob in the direction of clockwise into position maximum .
• Turn the power selector to the desired position. The indicator light will illuminate.
Position "I": Minimum power.
Position "II": Maximum power.
Position "0": Off.
RM 1510
RM 2010
• When the room temperature is the desired one, turn the thermostat control counter
clockwise to clockwise until the indicator light turns off. Leave the command in that
position, and the thermostat will automatically maintain the selected temperature, initiating
a series of connections and disconnections.
• When not using the unit, turn the power switch to "0 "(OFF) and disconnect the network
device.
MAINTENANCE AND CLEANING
• Before cleaning, make sure the appliance is disconnected from the network and
completely cold.
• It is important to keep the grille clean. Remove any lint, dust or strange elements that
hinder a correct air evacuation
• Use a dry cloth for cleaning.
Position "0"
Position "I"
OFF
OFF
POWERS
Position "II"
750 W
1000 W
1500 W
2000 W
14
Publicidad
Tabla de contenido
