Mounting Example - Roadstar CD-815UMP Manual De Instrucciones

FEATURES
The unit features a detachable front control panel, FM stereo RDS, CD - USB:
• Electronic Volume, Bass, Treble, Fader and Balance control.
• CD Player with antishock protection
• Precision electronic tuning with phase-lock loop (P.L.L.)
circuitry.
• Programmable 18 preset memory tuning
Power output, 4 x 7,5W RMS (4 x 15 W max)
•
• Manual / Auto (Seek) / up and down tuning control
• Band selector for FM1/ FM2 / FM3
• Clock Function in RDS
• MP3 Repeat Function
• Preamplified Line-out
• Detachable front panel protects against theft
• Lighting system
• RDS Function: PI (Program Identification)
PS (Program Service Name)
(Traffic
AF (List of Alternative Frequencies)
TP (Traffic Program)
INSTALLATION
PRECAUTIONS
• Choose the mounting location carefully so that the unit will not interfere with the normal
driving functions of the driver.
• Avoid installing the unit where it would be subject to high temperatures, such as from
direct sunlight or hot air from the heater, or where it would be subject to dust, dirt or
excessive vibration.
• Use only the supplied mounting hardware for a safe and secure installation.
• Be sure to remove the front panel before installing the unit.
Mounting angle adjustment
Adjust the mounting angle to less than 20
English
Announcement)
TA
PTY (Program Type)
o .
3 4 English

MOUNTING EXAMPLE

Installation in the dashboard
Note: Keep the release key in the safe place as you may need it in future to remove the unit
from the car.
Detaching and attaching the front panel
The front panel of this unit can be detached in order to prevent the unit from being stolen.
DETACHING THE FRONT P ANEL
Before detaching the front panel (14), be sure to press the PWR button (1) To OFF first.
Pull out the panel towards you in order to detach completely the panel from the main unit.
Refer to below instruction.