Installing / Replacing The Battery; Getting Started - Tangent Classic BT Manual Del Usuario

INSTALLING / REPLACING THE BATTERY

The remote control comes with one CR2025 battery which must be installed. When the range of the remote
seems reduced or if it ceases to work properly, it's time to replace the battery.
1. Slide out battery compartment on rear of remote control
(remove battery if replacing).
2. Place new CR2025 in battery well as shown
(make sure '+' side is facing up).
3. Re-insert battery compartment.
WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed
to water, fire, or high temperatures. Do not pace loose batteries in a pocket, purse, or other container
containing metal objects, mix with used or other battery types, or store with hazardous or combusti-
ble materials. Store in cool, dry, ventilated area. Follow applicable laws and regulations for transport
and disposal.

GETTING STARTED

1. Remove the protection sheet from the remote control battery compartment as shown below.
2. Connect the power adaptor's DC plug to the power jack on the back panel. Then connect
the power plug on the other end to an AC outlet.
3. Turn on the unit with the power button on the remote control and the LED indicator would
turn white.
EN