Bluetooth Module (Option)
Make sure the Bluetooth module is turned on (and not in
Airplane Mode).
Bluetooth Driver Installation
Follow the instructions below:
(Intel) WLAN and Bluetooth Combo
1. Click Option Drivers (button).
2. Click 3.Install Combo BT Driver > Yes.
3. Click Next > Next.
4. Click the button to accept the license and click Next.
5. Click Next > Finish > Yes to restart the computer.
(Qualcomm) WLAN 802.11ac and Bluetooth 4.1 Combo
1. Click Option Drivers (button).
2. Click 3.Install Combo BT Driver > Yes.
3. Click Next > Next > Install.
4. Click Finish > Yes to restart the computer.
(Third Party) WLAN 802.11b/g/n and Bluetooth 4.0
Combo
1. Click Option Drivers (button).
2. Click 3.Install Combo BT Driver > Yes.
3. Click Next.
4. Click Finish to restart the computer.
36
Bluetooth Configuration in Windows
Make sure the Bluetooth module is turned on (and not in
Airplane Mode) before configuration begins.
1.
Click the Settings item in the Start Menu and then click
Devices.
2.
Click Bluetooth.
3.
Make sure that Bluetooth is turned on and a list of discovered
devices will appear.
4.
Double-click the device you want to pair with the computer and
click Pair.
5.
On first connection the computer will provide you with a pairing
code to be entered onto the device.
6.
Enter the code into your Bluetooth enabled device and click Yes
on the computer to complete the pairing.
7.
Select a device and click Remove Device to disconnect from
any device.