Raid Setup - bto X-BOOK 15CL78 Manual Del Usuario

RAID Setup

You may use your hard disks/SSDs in combination with
Striping (RAID 0) or Mirroring (RAID 1) for either fault
tolerance or performance.
RAID Level
RAID 0 Identical drives reading and writing data in
(at lease two parallel to increase performance. RAID 0
hard disks/ implements a striped disk array and the data is
SSDs broken into blocks and each block is written to
needed) a separate disk drive.
Identical drives in a mirrored configuration
RAID 1 used to protect data. Should a drive that is
(at lease two part of a mirrored array fail, the mirrored drive
hard disks/ (which contains identical data) will handle all
SSDs the data. When a new replacement drive is
needed) installed, data to the new drive is rebuilt from
the mirrored drive to restore fault tolerance.
Table 2 - RAID Description
6
Description
Prepare the following before setting up your SATA hard
disks/SSDs in RAID mode:
• The Microsoft Windows 10 OS disc.
• An attached external DVD drive.
• A hard disk installed in the Primary HDD bay and a second
(identical) hard disk installed in the Secondary HDD bay.
Or
Two identical SATA solid state drives.
• The Device Drivers & Utilities + User's Manual disc.
Prepare the following before setting up your PCIe SSDs
in RAID mode:
• The Microsoft Windows 10 OS disc.
• An attached external DVD drive.
• Two identical PCIe solid state drives.
• The Device Drivers & Utilities + User's Manual disc.
• A USB flash drive.
• An operable computer (to copy files from the Device Driv-
ers & Utilities + User's Manual disc to the USB flash
drive).
Note: All hard disks/SSDs in a RAID should be identical
(the same size and brand) in order to prevent unexpected
system behavior.