Alarm Functions; Setting The Alarm Time - Coby CRA79 Manual De Instrucciones

Alarm Functions

Setting the Alarm Time

1. Set the SETTING switch to the ALM position.
2. To set the alarm hour, rotate the set dial clockwise
until your desired hour displays.
3. To set the alarm minute, rotate the set dial counter-
clockwise until your desired minute displays.
4. Once the desired alarm time is displayed correctly,
move the SETTING switch to the RUN position to
confirm. The display will stop flashing.
When setting the clock or alarm time, do not ro-
tate the set dial too quickly. Doing so may cause
the unit to register your time settings incorrectly.
Wake to radio
Once the alarm time is set, make sure the radio is tuned
to the correct station and desired volume level. Set the
POWER switch to the AUTO position to set the alarm.
Wake to buzzer
Once the alarm time is set, rotate the VOLUME dial to the
right until it clicks into place at BUZZ position. Set the
POWER switch to the AUTO position to set the alarm.
Page 8 Coby Electronics Corporation